Type TW Silicon Carbide Heating Elements

Ordering Silicon Carbide Heating Elements

Step 1

Indicate which type of element you need.

Type "TW1"
Type "TW2"

Step 2

Indicate the following dimensions identified in the element drawings above:

• Heated Length Diameter (d)
• Terminal Diameter (D)
• Heated Length (L1)
• Terminal Length (L2)

Note:  Element diameters are normally specified in millimeters.  Element dimensions may be specified in millimeters or inches.

Step 3

Indicate any other critical dimensions or tolerances if needed.

---

Specification and Range of Resistance

Dia(d) in mm	Length of hot zone(I) in mm	Length of cold zone(L1) in mm	Overall Length(L) in mm	Range of Resistan- ce(Ω) in ohms	Dia(d) in mm	Length of hot zone(I) in mm	Length of cold zone(L1) in mm	Overall Length(L) in mm	Range of Resista- nce(Ώ) in ohms
8	100-300	60-200	240-700	2.1-8.6	30	300-2000	250-800	800-3600	0.4-4.0
12	100-400	100-350	300-1100	0.8-5.8	35	400-2000	250-800	900-3600	0.5-3.6
14	100-500	150-350	400-1200	0.7-5.6	40	500-2700	250-800	1000-4300	0.5-3.4
16	200-600	200-350	600-1300	0.7-4.4	45	500-3000	250-750	1000-4500	0.3-3.0
18	200-800	200-400	600-1600	0.7-5.8	50	600-2500	300-750	1200-4000	0.3-2.5
20	200-800	250-600	700-2000	0.6-6.0	54	600-2500	300-750	1200-4000	0.3-3.0
25	200-1200	250-700	700-2600	0.4-5.0

Products with special specification can be produced to meet the customers' requirments