|
Type SG Silicon Carbide Heating Elements
Step 1
Indicate which type of element you need.
|
Type "SG1"
|
|
|
Type "SG2"
|
|
Step 2
Indicate the following dimensions identified in the element drawings above:
- Heated Length Diameter (d)
- Terminal Diameter (D)
- Heated Length (L1)
- Terminal Length (L2)
Note: Element diameters are normally specified in millimeters. Element dimensions may be specified in millimeters or inches.
Step 3
Indicate any other critical dimensions or tolerances if needed.
|
