High Temperature Tube Furnace

Products Introduction

AY-TF-60/80/100/120/150-125 series tube furnace uses  the resistance wires as its heating element. Hearth is built with Ai2O3 fiber materials. Temperature of this furnace is controlled by high precise SCR power controller with +/-1 °C accuracy and 51 programmable segments up to 1250°C This furnace is built with double layer steel casing and air cooling, two cooling fans inside the case keep the temperature lower. The tube is sealed by stainless steel vacuum sealed flanges, it can be used under vacuum and other gases condition. This tube furnace is an ideal tool for sintering all types of materials/chemical. Great for labs or college scientific research use.

Tube Materials

1250C High purity Quartz Tube

Tube Size

OD: 60 /80/100/120/150mm in diameter  x 1000 mm length

Max. Working Temperature

1250C

Refractory Lining

1200C grade fiber alumina

Heating Element

1250C  the resistance wires 

Normal Working Temperature

0-1100 ^oC  

Temperature Controller

PID automatic control via power control, e.g. current limiting phase angle fired the resistor  with 51 steps programmable

Max. Heating / Cooling Rate

10-20 ^oC/min below 1200 ^oC  

Constant Temperature Zone

 300 mm

Temperature Accuracy

 +/- 1 ^oC (+/- 1.8 ^oF)

Vacuum Seal Kit

 60 /80/100/120/150mm diameter stainless steel vacuum seal assembling with one vacuum gauge, two valves and Four porous ceramic blocks are included.

Input

 Single Phase, 208 - 240V AC,  50/60 Hz

Output

 Max. 5KW

Dimension

 550 L x 450 W x 670 H  mm

Net Weight

 80 kgs

Weight of Shipment

 120 kgs

The following is standard product specifications. Our company can also customize the product based on your business needs.